CQuartz DLUX - 30ml Kit | CarPro

CQuartz DLUX is the most advanced plastic restoration coating available today! Made from high quality organic silane, contains more than 50% pure silica!
Unlike other products for plastics, CQ DLUX restores and protects plastics for 2 years or more, using a nano composition that allows chemical bonding to the pores of the plastics.
Additionally, it has a high resistance to extreme temperatures, making DLUX the perfect companion to protect your rims.
Traditional products lose adhesion within a few weeks or a few months, but DLUX has been tested all over the world and continues to protect for months and months!
DLUX long-lasting coating was developed specifically for plastics as well as rubbers and metals. It can be used on almost all types of wheel finishes including varnished, chrome, aluminum and plastic.

Kit Contents:

• 1 x CQuartz DLUX 30ml
• 4 x Suede MF Applicator 10x10cm
• 1 x Foam applicator
• 3 x Cotton applicator 5cm diam.
• 2 x Foam swab
• 1 x Mini cotton swab

Characteristics :

• Resists temperatures up to 400º C.
• Very simple to apply to textured plastics
• Excellent UV protection on all outdoor substrates
• Versatility: plastics, wheels and rubbers
• Average consumption for 4 plastic rims and trims = 10ml

Applications :

• Plastic trims
• Rubber moldings
• Engine compartment
• Headlights, projectors and stops
• Rims
• Tires
• Metallic friezes
• Exhaust tips
• Chrome
• Plastic wheel arches

Indications for plastics:

• Make sure the surface is dry and cool. (Do not apply to hot surfaces or in the sun)
• Rub the surface with an APC using an MF cloth
• Rinse while shaking with an MF cloth to remove all APC
• Dry or allow to dry completely
• Apply the CarPro Eraser to the surface
• Moisten the applicator with 5-6 drops of DLUX and spread evenly over the surface
• On textured surfaces simply apply, on smooth surfaces apply a thin layer and wipe with an MF cloth to level evenly

Indications for non-porous materials (Painted and Metals):

• Polish as needed
• Run the CarPro Eraser over the surface to remove polish residue
• Apply a thin layer of DLUX
• On rims (metal, chrome, varnished) let it cure for 1 minute if they are around 30º in ambient temperature, up to 10 minutes if they are around 10º, then using a short-haired MF cloth (suede) gently clean the surface in circular movements until no marks can be seen

Precautions:

• Curing time 1 to 3 hours without letting any water contact the surface. If it comes into contact with water during the first 24 hours, wipe the water off the surface before it dries.
• After 3 days you can now carry out the usual washing
• Do not allow high alkalinity chemicals (+ pH11) to remain on the surface for considerable periods of time as this may affect the durability of the coating.