Detailing Swirl Finder Pro | Maxshine

LED inspection flashlight

The Detailing Swirl Finder Pro LED inspection light was developed in partnership with the industry leader in professional automotive lighting. With its small size it is an ideal inspection torch for any professional as well as the enthusiastic detailer. Adjustable output power and three different light temperatures in a robust, small body with IP65 water resistance.
The most practical flashlight for detail work you can have, with a built-in hanging bracket and a magnet inside the rubber-wrapped base.

Characteristics:

• Sturdy body, lens and headband
• Strong magnetic base and rotating hanger
• Charging station with magnetic base
• Foldable rotating design up to 180 degrees
• Autonomy indicator with 5 LEDs
• Autonomy: 2.5 hours (in the last 5 minutes it changes to the minimum level)
• Certified to CE standards

Specifications:

• Color Temperature: 2700K – 4500K – 6500K
• Output power: 500LM
• COB LED technology, CRI 96+
• Li-ion battery 3.7V 2600 mAh
• Recharge period: 4 hours (full charge)
• Charging method: 1 meter USB cable + charging base 100-240V to 5V 1A (included)
• Supplied with instruction manual (EN)

How to use:

Before use, charge the Detailing Swirl Finder Pro flashlight for the first time using the included USB cable. The first charge will take approximately 1 hour (until the indicator lights up green). The short initial charging period is due to the torch being supplied partially charged. Note that the flashlight should not be stored with the battery completely discharged as this may damage the battery. We recommend fully recharging every 30 days even when not in use.
The recommended way to expose defects in the paintwork is by alternating between 2 color temperatures, away from the bodywork at a distance of 50-100cm and slowly covering the area to be inspected.