LIFT | CarPro

Pre-wash shampoo

CarPro Lift is a highly concentrated foaming pre-wash agent that dissolves and loosens a large amount of dirt and debris from the surface in a completely "touchless" manner, prior to washing with shampoo.
Lift uses pH12 alkaline cleaning ingredients, which are strong yet gentle and compatible with virtually all foam lances. Applied at a typical dilution of 1:10 (or another depending on the desired viscosity) Lift typically remains on the surface for 5 minutes. The lift is specifically formulated to allow the surface to remain wet for as long as possible and rinses off easily. It is not a high surface foam production product but rather developed to be a true surface active agent.
During the foaming period, the bubbles burst and move, activating the rinsing and cleaning agents that begin their function. Dirt is released from the surface by attaching itself to the proprietary blend of surfactants.

Use as pre-wash:

• Use only on non-hot surfaces and never in the sun. Do not allow it to dry, even highly diluted.
• Dilute Lift with water, we recommend 1 to 10 (1 part Lift and 10 parts water). You can use less product for a more liquid mixture or more product for a denser foam.
• Allow the foam to remain on the surface for a few minutes, without letting it dry, the longer the better.
• Rinse the entire vehicle with pressurized water.
• Then wash the vehicle normally with Reset shampoo.

Use as normal wash:

• Use only on non-hot surfaces and never in the sun. Do not allow it to dry, even highly diluted.
• Rinse the vehicle with water to remove loose dirt.
• Dilute Lift with water, we recommend 1 to 10 (1 part Lift and 10 parts water). You can use less product for a more liquid mixture or more product for a denser foam.
• Allow the foam to remain on the surface for a minute or two and wash with a glove from top to bottom.
• It is important to rinse the glove after each step in a bucket of clean water or even directly with a hose.
• After washing the vehicle, rinse it thoroughly with water to remove shampoo residue.
• Dry the vehicle with a drying towel such as Dhydrate or MetroVac Blaster.